High Speed Padding Mangle

The High Speed Padding Mangle is a small machine used for textile printing

Designed to provide continuous process of fabric preparation and colorization
for printing . This could be also used as post treatment machine or for
colorization of fabrics.

Coating: The amount of coating emulsion could be adjusted to suit all types of
dyes, including reactive, acid and disperse dyes.

Colorization:- The fabric can be coated with all types of dyes including
reactive, acid & disperse dyes.

The unit automatically feeds fabric into an coating unit, drying the fabric
after coating and winds the fabric into rolls at the completion of the process.

All units are exchangeable and works as as plug-in system.

FABRIC FEEDER

Fabric unwinding device with fabric tension roller for fabric rolls of 250mm

Fabric join bar with needle holder



COATING

Stainless steel coating unit

This unit could handle fabrics of width up 2200mm.

The speeds of coating and speed of fabric are adjustable according to used
fabric. All set-ups are accessible using friendly touch screen.

Separate liquid tank allow easy exchange of used coating formula and is equipped
with mixer for coating formula mixing and constant steering through coating
process.



DRYER

The dryer is infra-red, double walled and is fully insulated to minimize any
heat loss.

The heating and regulation are controlled via a digital temperature controller
situated on the electrical cabinet

Small exhaust fan is situated on top of dryer.



BATCHING

Fabric re-winder can accommodate rolls up to 250 mm diameter and includes
automatic speed control, which is regulated by a "dancing" bar.

The unit consists of scroll roller and one side fabric edge control.

All functions of the Mangle are controlled by PLC with programmable terminal in
auto and manual mode. The control panel is located in easy to reach position.
This Mangle can be attached to the printer for getting error logs etc.

Specification:

Fabric Maximum Width: mm 2200

Maximum Temperature: C 180

Maximum Speed linear: m/hr Up to 100 (Linear meters)

Machine Length: m 3.35

Machine Width: m 2.5-3.2

Machine Height: m 2.02

Tank Capacity: L 100

Water Consumption: L/hour 250

Power Supply: 380/415V, 50Hz or 220V, 60Hz3 phase, neutral, earth wire, 100A

Power Consumption: kW 45.0

Fabric Roll Diameter max. : mm 350