Model : TEXFAB - Continuous Steaming / Curing / Polymerising Machine

Special Features & Technical Data

"TEXFAB" continuous steaming/curing/polymerising machine is the
updated and technologically advanced version. The steaming chamber is closed
type made completely in stainless steel AISI 316. Fabric feed in takes place
through an opening on the front side whilst extraction is from the back side.
The fabric is placed on rods and transported through the steaming chamber. The
rods are rotating on their axis to avoid marking off from the rod itself. Loop
formation is done by a dancing roller system.

For low temperature steaming, the chamber roof is heated by steam coils
preventing condensation and drippings, our steam agers are equipped with special
device a Steam Saturator which conditions the steam passes through the water
before being injected into the steaming chamber. These particular
characteristics of steam pre- conditioning which prevent and control the
exothermic reaction of the fabrics and of the printing paste, make our machine
" UNIQUE" of its kind and are the basis of great success achieved all
over in textile industries.

For high temperature steaming our steam agers are equipped with efficient
re-circulation system and heat exchangers using Thermic Fluid which ensures
uniform temperature in the chamber. Special system to allow air to re-circulate
instead of steam permitting polymerization treatment with hot air upto 160°C.



Specifications:

Fabric Capacity: Meters 65

Standard Roller Width: mm 1350-3500

Working Speed: Mtrs/min 2.6-13

Dwell Time: Min 5-25

Process Temp required in saturated condition: °C 102-108

Process Temp. required in high temp. condition: °C 130-180

Process Temp. required in hot air condition: °C 100-160

Average Steam Consumption: Kg/hr 200-600

Installed Thermal Power: K.cal/hr 61500-170000

Installed Electric Power: Kw/ HP 10.5/14 12/16

Steam Pressure Required Before PRV: P.S.I 60

Steam Pressure Required After PRV: P.S.I 30

Thermic Oil Temp. Required: °C 240



Floor Space Required

Chamber Length (A) : mm 2903

Total Length  :(B)mm 8435

Width: mm Roller width + 2456

Height: mm 3888