High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine:
LZ-2282N-7(standard zigzag/with lower knife and automatic thread trimmer)

The LZ-2282N/-2282N-7 effectively supports the operator in the lace-attachment
process for foundations, dramatically increasing productivity.



Productivity is dramatically increased.

The machine incorporates a built-in lower knife that trims only the lower
material. This allows the machine to simultaneously attach lace to the body of
the foundation and trim only the body during processes to attach lace to the
bottoms or tops of slips or to the joint seam lines of shorts.

The machine demonstrates consistent trimming performance.

The knife is driven by a motor that runs independently from the sewing machine
motor. With this feature, the knife can continue to run at a high speeds during
trimming even when the speed of the machine is reduced during startup or when
sewing curved sections. Furthermore, the knife is placed just beside the needle
to provide a constant trimming width even on the curved sections.

Upgraded operability.

Since the knife stops at the upper position of its stroke at all times, the
material can be smoothly placed on the machine. The knife height can easily be
changed by operating the lever mounted on the front face of the machine in
accordance with the type of material to be used. If the knife height is set at 0
(zero), the working surface of the machine will become flat. In this case, the
knife-driving mechanism will be automatically turned off, permitting machine use
for typical standard zigzag stitching operation.