Model - Selene 21015 Finishing Machinery for the Ribbon

It is a special designed machine for the finishing of the narrow elastic and
rigidity ribbons loaded by bobbin to contain and delivered into laps. The frame of the machine and all its components are manufactured by high grade A4 and A6 stainless steel. The electric control panel is external to the machine, complete with proper frame manufactured by A4 stainless steel. The heating of the Drying & finishing cylinders is made by methane heaters or GPL. All the moving devices are properly protected, in accordance with current rules, Following is the
step-by-step working procedures :

- Loading of the ribbon bobbin on suitable supports to - contain.

- Drawings in of the ribbon into a tank filled up by finishing liquid (with
subsequent ribbons soakings.)

- Squeezing of the ribbon (liquid removing.)

- Passing trough a first drying and finishing stage made by one lower heated big
diameter cylinder, with by Teflon coated surface and by a second upper Teflon
coated cylinder, with by hand inclinable axis for the continuous variation of
the tension during the various steps.

- Passing through a second drying and finishing stage same as the previous.

- Delivery to the module where the laps are built up and final packing into
suitable box.

- One series of dancers properly positioned along the machine , automatically
regulates and controls the velocity of each cylinder and allows the maintance.



Technical Specification :

Max Ribbon Velocity : 90m/min

Ribbon Width : 5-150 mm

Max Ribbon Diameter : 400mm

Max Squeezing Pressure : 5 bar

Max Drying Finishing Cylinder Temperature : 200 deg C

Max Finishing Tank Volume : 30 Liters

Max Power : 6 kw

Machine Overall Dimension WxLxH (mt.) : 2,3 x 5 x 2,5