Standard Centrifuge - DKE 1500 x 700 FU

Suitable to centrifuge hank yarns, woven textiles, knits, skeins, piece goods,
etc.

Basket features rim, suitable for manual loading and unloading.

Centrifuge using the well-proven three-column construction.

DKE=Centrally integrated special centrifuge motor, suitable for severe starting
conditions of centrifuges, soft start, pole-changeable (2 speeds) and electrical
braking of the machine. The basket is located directly on the upper shaft end of
the motor, which also serves as a sturdy bedding.

1500 x 700 = Basket Ø 1500 mm x 700 mm inner basket height

FU = Motor construction suitable for frequency converter operation, with or
without current recuperation when braking.

Typ: A = In special cases, it is also possible to equip the centrifuges with a
three-phase motor with V-belt drive installed in a console at the side of the
trough.

VKE = Centrifuge on stable base plate with special Visco damper. Contrary to
conventional three column designs, this new vibration insulator is capable of
absorbing much higher eccentricities and unbalanced forces caused by the
centrifuging material.

The loading device depicted is suitable for loading and unloading of knits,
woven textiles, etc. supplied to the centrifuge in the form of hanks or skeins.
The device can be rotated 180 degrees for unloading.