Rope Layer – Model: E 200 / 4

This new machine developed by SIMA Group represents an important novelty in
the field of rope layers, because E200/4 is suitable to produce small diameters,
from 2 to 5mm, without investing high capitals, therefore with the max
economical convenience. The E200/4 is made of a feeding section, running with 3
or 4 strands, and of a take-up section, which is the GS2000, a more than tested
machine. The system conceived in this way leaves complete freedom to the
customer concerning its use, because it is evident it can be used as a rope
layer or, using the only take-up section, as a twister. The E200/4 runs on the
principle of the 2 twists in the feeding section and 2 twists in the take-up
section; mechanically speaking, cynematism where introduced, which have been
considerably simplified, with benefits to the noise level, which is within what
foreseen by the international regulations, thanks also to the insulation.

* Advantages:

• Set-up of E200/4 through the control panel of GS2000


• Electronic change of the pre-twist ratio


• Device to detect the strand breakage


• Immediate change of the rotation direction S or Z


• New cynematism with consequent noise reduction


• Feeding up to 4 bobbins of 12" x 12", for a total of 160000 den

* Technical Data:

• Rope Diameter (in outlet): 2 ÷ 6 mm


• Max. Rotation: 4000 r.p.m.


• Twists: 8000 Twists / minute


• Twist Range: 20 ÷ 125 Twists / meter


• Twist Direction: S or Z


• No of spools in Feeding: 4


• Spool in Feeding Section: 12” x 12”


• Weight of the PP Full Spool: 10.6 kg


• Installed Power: 11 kW


• Machine Dimension feed + take-up: 5103 x 1600 x 1930 mm


• Machine Weight: 2500 kg


• Take-up in Bobbins: 6” – 8” – 10” – 12”