d.gen Teleios - Digital Printer

For a short time the textile direct printer 1377 names d.gen Teleios and was
published on the FESPA with some new technically developments. A heating rod
supersede the air blower for the fixation of textiles. The heating rods have the
advantage that the printed textiles are even fixed. Immediately the water steam
will suck off into a filter. The condensed water will caught in a container. An
additional advantage is the lower current consumption in comparison with the air
blower. The heating rods heat only during the production to avoid an overheat or
a burning of the textiles.

When the print workflow is finished, the fixation system stops the heat
supplying. The print size is enlarged to 260 cm. The machine can be supplied
with six or twelve colours and its suitable for coated and uncoated material.
The d.gen produces with all water based inks. The ink system with pressure
control is unique. Designed for easy ink refill while printing, the feeding
system contains over 1 litre of ink (each colour) - enough for even over night
production with the max. speed of 45 sqm/hour. The d.gen prints on elastic
textiles and specially on very thin tissue. A heat system is integrated for the
necessary fixation of the textiles. An integrated lighting over the printable
gives you the possibility to check the production results right after printout.

Further features are:

2 x 6 or 1 x 12 Colour Piezo head for rapid print speed and flexibility

Adjustable resolution from 360 to 1.440 dpi - high-quality resolution!

1000 ml continuous feeding system for each colour



Technical data:

Printing method: Piezo Inkjet

Fabric Feeding System: Cylinder Type

Printable width: 260 cm

Print speed: max. 45 m²/h

Ink types: Reaktiv-, Acid-, Disperse- and Pigment dye inks

Resolution: 1.440x1.440, 720x720, 720x360, 450x360 dpi

Interface: Bi-directional parallel / Ethernet 10 Base-T

Power resources: 740 TX/C: 2,0A / 100V-240V +/-10%, 50/60 Hz 740 TX/B: 35A /
100V-240V +/-10%, 50/60 Hz

Size (LxBxH): 389 x 116 x 139 cm

Weight: 455 kg



Further characteristics:

network interface card, service tool, operating instructions into German.

12 month guarantee of Multiplot Service Center (Bring In), 6 month guarantee on
the print heads.