Perkasa Stenter

Draper-Texmacos Perkasa Stenter ensures highest drying and heat setting
parameters while processing the fabrics. Its latest state of art stenter
peripherals like Entry device, Padder mangle 2 bowl type 10 ton, Weft distortion
rectifier, Drying chambers, Inlet and Outlet desks and Plaitter and batching
units are a perfect complement to the Perkasa stenter frame. These peripherals
can also be independently as a stand alone products

Technical Specifications:

A. Maximum roller width : 2200 mm

B. Maximum stenter width : 2000 mm

C. Width adjustment range of stenter : 800 ~ 2000 mm

D. Maximum mechanical speed : 80 m/min

E. Type of heating : Hot air-thermic fluid heated

F. No. of chambers : 2 ~ 8

G. Chamber length : 3000 mm

H. Chamber temperature : Max 210 deg C

I. Blowers per chamber : 2 nos belt driven

J. Blower motor rating : 2 speed; 7.5 / 3.2 kW; 1450 / 960 rpm

K. Oil radiators per chambers : 2 nos

L. Edge sensor : Toyo PTD 60 with PCP40 controller

M. Over feed adjustment rate : - 10% ~ + 30%

N. Main motor-chain drive : 15 kW; 4 pole; AC motor with an inverter

O. Over feed roller motor : 18Nm; 3000 rpm AC servo motor

P. Pin on gear motor : 2nos; 4.5Nm / 2000rpm AC servo motor

Q. Padder motor : 11 kw , 4 pole, Induction motor

R. Width variation motor : 1.5kW; 6-pole; AC motor

S. Exhaust fan for first & last chamber : 2 nos - 1.5 kW AC motor

T. Exhaust fan for intermediate chamber : 2.2 kW, AC motor